Laboratory Autoclaves

Construction

Triple walled with steam jacket and separate boiler. Inner chamber and steam jacket are made our of Heavy gauge S.S. sheet with leak proof argon welding.The Autoclave has single piece door made of stainless steel. Back plate and rising is also made of thick stainless steel sheet. All the Autoclaves are hydraulically tested to withstanding 2.5 times the working pressure. Mounted on tubular steel frame with ground leveling screwed flanges. The Outer jacket is wrapped with asbestos sheet or glass wool to minimize the heat losses due to radiation and is covered by polished stainless steel for the elegant appearance.


Steam Generator

Made of heavy stainless steel sheet. Heavy ring mounted in front of the boiler with folding thick stainless steel plate fitted with heating elements and low water level cutoff device to protect the former from burning out dry. Front folding plate system provides for easy cleaning of the deposited scale on the elements and the walls forlong life and efficiency. Fitted with water gauge glass for water level indication, water inlet and outlet valves.


Pressure Control

The pressure control device is incorporated in all electrically operated sterilizers. It economics on power consumption and reduces the frequent opening of the steam release valve and prevents the release of steam in the room, it cuts off the power supply to heaters when the set pressure is achieved an re-energises the heating when the set pressure is achieved and re-energises the heating elements when pressure falls below the set point.


Heating Elements

Flanged type/ immersion heating element are made of high grade material Operating Temp. & Pressure Sterilizing temp : 121" Sterilizing pressure : 1.2o 1.5 kg/cm2 (15 psi to 22 psi) Power Requirement : Suitable to operate on 440V volts, 3ph,50Hz/Ac supply.


Autoclave Available in following capacities :

INNOVATIVE vertical Autoclave with automatic controls and safeguards to manage daily sterilization in the Hospital and clinics. INNOVATIVE Vertical Autoclave mane out of total medical grade stainless steel (16Gage) and all part also made of S.S. and top lid is dye pressed 6mm tick solid S.S. plate. and polished for the elegant appearance. The Vertical Autoclave is equipment with low water level cut off system. When water level fall down the equipments automatically gets cut power supply to protect the elements to burning out dry fitted with water gauge glass for water level indication, water inlet and outlet values. This Autoclave has pressure control device incorporated it economics on power consumption it cuts off the power supply to heaters when the pressure is achieved at 20 psi and re-energises the heating elements when pressure falls below the set point. INNOVATIVE Vertical Autoclave front panel is provided with working pilot lamps. Timer for sterilizing, switch for selection process and Sterilization and two Alarm buzzer one for the finished the process and other one is for when the sterilization is complete.

As a specific requirement for Clinic portable Vertical Cylinder Single Chamber Autoclave with Central Locking System Lid in diameter 12”, 14”, 16”, 18” and now in 20” also. Electric & Externaly heated. Cylindrical drum and outer cover made out of stainless steel. Top lid of solid stainless steel “Die Press”, equipped with steam release, Double safety valves and drain cock. Specially designed heat resistance gasket. New type of element of 2Kw/3Kw is covered by same metal removable cover to protect the electric shock. The equipment is fitted with specially design LOW WATER LEVEL CUT OFF DIVISE SYSTEM. This system will protect the element at the low water level and indicate at the control board and equipment’s gets automatically cut off the electricity. The Radial Locking System of Equipment made out of Mild Steel with electroplating crom. With the same specifications as above we make automatic autoclave which fitted with high pressure control state electronic time programme system with Item Code: 1059

Vertical Cylindrical Single Chamber Autoclave in diameter 12", 14", 16" and 18". Electric and externally operated. Cylindrical drum and outer cover made out of stainless steel. Top lid of solid stainless steel "die press"' equipped with steam release, double safety valves. Specially designed heat resistance gasket. New type of element of 2 Kw is covered by same metal removable cover to protect the element. Gun metal casted wing nuts provided to tight the lid.

Autoclave is the modern equipments with many controls and safeguards to manage day to day sterilization in the Clinics, Hospitals, O.T.s, and Labs. Autoclave is economically designed, automatic and convenient to operate. After placing instruments in the sterilizer one needs to just switch on and the equipments controls the rest. It is very simple to install, use and maintain. It operates on sterilization cycle of 125 c temperature and 15psi pressure for 22 minutes. Power consumption is minimal since AUTOCLAVE gets heated for only 8 to 10 minutes during this cycle. Power cuts off when desired temperature is achieved and gets on when it gets lower than the fixed.

AUTOCLAVE has International Safety Standards: double safety value, precise weight to release steam at appropriate time and automatic power cut at specific temperature and time. Autoclave provided audio-visual control of sterilization cycle completion (indicator/buzzer). Visual indicators are provided to show the process of sterilization.

 

Standard Accessories : 

1.One Stainless Steel dressing drum. 
2. One De-ionised water jar.
3. Sterilizing indicators.
4. Spare one rubber gasket.
5. One water measurement cup.

 

Technical Specifications :

• Sterilizing vessel is made up of toughened medical grade Aluminium. Its inner surface is polished and outer is long life powder coated.

• Capacity of sterilizing vessel-13.5liters.
  

• Power consumption- 2000 watts.

• Duration of sterilizing cycle- 22minutes
  

• Power supply- A.C. 220 Volts, 50 Hz.

AUTOCLAVE TABLE TOP 2000 is the modern equipments with many controls and safeguards to manage day to day sterilization in the Clinics, Hospitals, O.T.s, and Labs. 

AUTOCLAVE TABLE TOP 2000 is front loading type design, automatic and convenient to operate. After placing instruments in the sterilizer one needs to just set the timer according to sterilizing goods & switch ON and the equipments controls the rest.
Sturdy construction throughout: chamber made of anti-corrosive stainless steel designed to withstand 3 times the maximum pressure and provided with two-step safety door locking mechanism.

The front panel is provided with Pressure Gauge, Working Pilot Lamps, Timers for sterilizing & drying .

We bring forth an elaborate range of Cylindrical Horizontal Autoclaves, which is offered at industry leading rates. These products are widely used in various laboratories for their day to day studies on scale sterilization procedures where utmost significance is laid on the dryness of the sterilized medium. This range of products is manufactured in exact accordance with the preference and requirements of the clients. Features:

• Dimensional accuracy
• Trouble free operation
• Longevity